Seat Belt

Fastening the Seat Belt

Position the lap belt as low as possible,

Position the lap belt as low as possible, not on the abdominal area, then adjust the shoulder belt so that it fits snugly against your body.

Unfastening the Seat Belt

Unfastening the Seat Belt

Depress the button on the seat belt buckle.

If the belt does not fully retract, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts.

NOTE

NOTE

If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized Mazda Dealer.

Front Shoulder Belt Adjuster

Make sure the adjuster is locked.

Make sure the adjuster is locked.

    See also:

    Accessory Sockets
    Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A). Front The ignition must be switched to ACC or ON. Center, Rear The accessory sockets can ...

    Fuel Requirements
    Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fu ...

    Monitoring and Maintenance
    Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: - SAS unit. - Front air bag sensor. - Air bag modules. - Side crash sensors. - Air bag ...